Real timber.
Naturally unique.
Crafted without compromise.

Authentix®Veneers

Real timber. Naturally individual.

Authentix® Veneers by Timberwood Panels is a curated collection of natural timber veneers for architectural interiors, cabinetry, joinery and furniture across Australia.

Timber veneer has been at the heart of Timberwood Panels for decades. Our extensive collection brings together carefully selected Australian native and international timber species, offering architects, interior designers, joiners and specifiers a broad choice of natural colours, grains and characteristics.

From American White Oak and Walnut to distinctive Australian species such as Blackbutt and Spotted Gum, every veneer tells a different story. The natural character of real timber creates warmth, depth and individuality that cannot be replicated by an artificial surface.

More Than a Species

The final appearance of timber veneer is influenced by more than the species alone. Veneer cut, matching, lay-up and finish all change how the grain, colour and natural characteristics are expressed.

Crown cut, quarter cut and rotary cut veneers each create a distinctly different visual result, while matching and lay-up techniques allow designers to achieve anything from considered consistency to highly expressive feature surfaces.

Naturally Unique

Timber veneer is a natural material, and variation in colour, grain and pattern is part of its character. Samples should therefore be considered an indication of the species rather than an exact representation of future production.

For projects where visual consistency is important, Timberwood Panels can assist with batch-controlled samples and project-specific veneer selection.

Timberwood Panels are giving Timber Veneerboard a new look. Ideal for feature doors and panels in commercial and domestic bathrooms, kitchens, furniture and joinery, our Timber Veneer Wire Brush Service can be applied to most of our Timber Veneers.
Using a revolutionary sander allows Timberwood Panels to apply a wire brush finish giving a more defined grain to the board. This process favours crown cut veneers but the final look will vary from species to species creating an original and unique look for your feature.
The Minimum size for this service is 0305x0120x3.6mm with Maximum size being 3660x1250x50mm.
All pressing substrates must be flat and have a solid core. Raw materials such as medium density fibreboard (MDF) or particleboard are ideal for pressing as they have been engineered to withstand the pressure and heat of a hot press along.
HOT PRESSING MINIMUM MAXIMUM
Press Length 1200mm 3650mm
Press Width 750mm 1540mm
Press Thickness 1mm 60mm
Pressing veneer onto foreign substrates is possible, however the following guidelines need to be followed:
- Substrate cannot be pre-finished or have any kind of coating on the pressing surface.
- All substrates should be supplied oversized, various elements of the pressing cycle can impact the overall size of the board/substrate; infeed, outfeed, handling, etc
- Substrates must be free of any machining; holes, rebates, grooves, etc. Any voids in the substrate can compromise the bond between veneer and substrate
- Substrates must be free of any metal objects i.e. hardware, screws, nails, etc
- To prevent bowing and equal thicknesses, veneer should be pressed on the opposite side (back) of the face
As an example, please see below guidelines for pressing onto a door:
- Ensure the door is solid core, without any internal voids
- Do not drill/rebate any hardware, holes and voids in the surface as this will compromise the veneer bond
- Consider the press limitations when choosing a door size
- To prevent damage please supply the door oversized as the door can be re-cut, once veneer has been applied
- Mark the door clearly as to which faces are to have veneer
BOARD TRIMMING MINIMUM MAXIMUM
Trim Length 1800mm 3650mm
Trim Width 750mm 1350mm
Trim Thickness 3mm 60mm (weight dependant)
BOARD SANDING MINIMUM MAXIMUM
Sanding Length 1800mm 3650mm
Sanding Width 750mm 1350mm
Sanding Thickness 3.6mm 60mm (weight dependant)
Important Notes:
- Crossbands can be trimmed and sanded
- Sheets cannot be sanded without being trimmed
- Sanders cannot calibrate boards/sheets
- Sanding of custom veneer presses (doors) is subject to inspection
- Sheets over 1350mm in width can be pressed but will be supplied untrimmed and unsanded, due to above limitations.Item description

Request samples

How to Specify

Real timber.Naturally unique.Crafted without compromise.

Authentix®Veneers

Need help specifying your project?

Real timber.
Naturally unique.
Crafted without compromise.